I got the frame of the Prusa more or less assembled, even though I still need to make sure that it’s straight and so forth. The motors are mounted and connected to the correct rods or belts, and they are stepping at 1\/16 nicely, although the LM8UU bearings don’t seem as smooth as I’d like them to be; I will probably re-assemble the Y-carriage whenever I add the hotbed, seeing as that might be cause for some misalignment and grinding.<\/p>\n
Robin from the forums<\/a> popped by the studio and we compared builds and I got some advice which is always welcome; where to source materials, in what order to assemble specific parts, why patience usually pays off better than a flamethrower, etc.<\/p>\n The long M3\u00d760 screws for the adjustable extruder have proved elusive, so I’ve gone for an M3 rod I’ll put wingnuts on. Once you get warmed up and understand how things are supposed to fit together and what functions they perform, you relax enough to improvise. It’s a good feeling. The Makergear hotend shipped with a mounting plate which doesn’t fit my Accessible Wade’s Extruder<\/a> so I schlepped the studio bike around looking for 4mm plywood to drill a replacement. Once that’s done and the hotend built, I’m pretty close to testing to print.<\/p>\n Perhaps I’ll be able to melt som plastic into a horrible blob in time for tomorrows opening of the new show here at Titanik<\/a> and impress Sara who’s coming over for a few days. That would be most<\/em> excellent.<\/p>\n [x_video_embed no_container=”true”]